REATTACHING THE REFRIGERATOR DOORS
4. Connect the water line (I]_}) and then insert
two clips on the coupling with pulling tube.
Connect the one connector((_) on left side
door and two connectors (I]_}) at each side
of the top cap.
_Two clips are enveloped inside of the top cap
_' Blue Clip
4
bispenser
5. Position the Top Table(I]_}) in place.
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert
the Top Table cap([_}) and close the doors.
_When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
Setti_g Up 13
To Next Page
Loading...
