35
DISASSEMBLY AND REASSEMBLY
3-17) Evaporator Cover In Refrigerator
Evaporator Cover
In Refrigerator
Part Name How To Do Descriptive Picture
1. Remove the angle cap with a
flat-blade screwdriver.
(Refer to the picture)
2. Unscrew 4 screws.
3. Remove the the lower part of
angle mid by pulling it out and
pushing it down.
(Refer to the picture)
4. Remove the hook by pulling it
from the lower part and pushing
the cover down.
(Refer to the picture)
5. Disconnect the housing
connector of the rear plane.
(Refer to the picture)
AW-BEST_SM(267)-0221 2008.2.21 8:34 PM 페이지35
To Next Page
Loading...
