4
1. PRECAUTIONS(SAFETY WARNINGS)
●
Before servicing the refrigerator or replacing parts, unplug the unit from the
wall outlet.
→
Shock Hazard, observe basic safety rules.
●
Be sure to use the specified generic parts when servicing the product.
→
Confirm the Model Number on Product itself.
Inspect the mew part and assembly for Voltage, Current and temperature
specifications.
●
During the Diagnostic and Troubleshooting phase it is recommended to do a
visual inspection of all the connections of the wiring harness to the PCB ASSY.
●
Check the traces of water infiltration at the electric parts.
→
If there is a trace of water infiltration it is necessary for you to replace the
insulation tape or harness.
●
Check the assemble status of parts after troubleshooting.
→
It should be done indiscriminately as before the repair.
●
Check the use circumstance of refrigerator.
→
If the refrigerator is installed at the place that is damp or wet, or
status of installation is unstable, change the installation place.
●
Do earth in case of need.
→
Particularly, Be sure to earth when there is a risk of an electric
leakage by humidity or wetness.
●
Do not use multi plugs in a plug socket at the same time.
Check if the power cord and socket is damaged, pressed, squeezed,
or fired.
→
If the plug or plug socket is damaged, repair or exchange that
immediately.
●
Do not allow consumers to repair the appliance by themselves.
●
Do not store other materials except the foods.
→
Drugs or scientific materials : difficult to keep precise temperature.
→
The inflammables(alcohol, benzene, ether, LP gas, butane gas etc.):
have risk of explosion.
AW-BEST_SM(267)-0221 2008.2.21 8:31 PM 페이지4
To Next Page
Loading...
