44
DISASSEMBLY AND REASSEMBLY
Power Cord &
Noise Filter
Part Name How To Do Descriptive Picture
1. Unscrew 2 screws.
2. Disengage the housing
connector.
3. Unscrew 2 earth screws.
4. Remove the cover by pushing
the hook up using a flat
screwdriver.
(Refer to the picture)
5. Disengage the housing
connector to separate the
power cord and noise filter.
AW-SEM Transform(RF267,2#3957D8 2009.8.20 4:53 PM 페 이 지 4 4 i n
To Next Page
Loading...
