Disassemble the refrigerator doors
Z_ Be careful not to drop and scratch the doors while
WARNING removing the doors.
Disassemble the refrigerator doors
1. With the door opened, remove the cap top table ( 1 ) with
a flat-blade screwdriver(-), and close the door. Remove the
3 screws holding down the top table ( 2 ) and turn it with
several wires connected.
.
Disconnect one connector ( 3 ) on the
right side door and one connector ( 4 )
on the left side door. Remove the water
line ( 5 ) while pressing the dark gray
color part ( 6 ) of the water line coupler.
Z_ if a red clip is on the coupler, it must
CAUT=ON be removed before removing the
tube.
3. Remove the 3 hex head bolts ( 7 ) attached to the upper left Socket wrench
and right door hinges with a socket wrench(10mm). Remove _ _
the ground screw ( 8 ) attached to the upper left and right door
hinges with a philips screwdriver(+). Remove the upper left and
right door hinges ( 9 ). _'
4. Lift the door straight up to remove.
5. Remove the screw( 10 ) attached to the lower left and right
door hinges with a philips screwdriver(+). Remove the 2 hex
head bolts( 11 ) attached to the lower left and right door
hinges with an allen wrench(3!16"). Remove the lower left
and right door hinges ( 12 ).
10 setting up