Samsung RF4287HAWP - Adjusting the Freezer Drawer Level

Sett n
ur French Door FRefrgerator
ADJUSTING THE FREEZER DRAWER LEVEL
Adjustment part
/
Freezer Drawer
1. Locate the height-adjuster ( 1 ) in the freezer drawer.
Unscrew the 8 Phillips screws ( 2 ) slightly to loosen the door.
2. Loosen the controller screw( 3 ) with a Phillips screwdriver(+).
®
3. Find the best level to align the door slope.
,, After adjustment, tighten the controller screw ( 3 ) and then philips screws.
@
Example) The slope is about 0.08inch(2mm) as shown below.
Rotate the height adjuster to -2.0 to reduce the door slope.
s,o_oI_
.o.
Reference
plane-.----------___
setting up 21