ur Frenoh Boor Aefr¢erator
ASSEMBLE THE FLEX DOOR
1. Pull out the rails fully on each side of the cabinet.
J
J
f
2. Attach the Flex door front onto the open slots on the sides.
3. Tighten 2 hex head bolts completely with a socket wrench
(10mm).
u
Put the cover w/harness ( 2 ) on the right joint after connect the
housing.
( .......
(
5. Insert the Flex room ( 1 ) into the rail system.
setting up 15
To Next Page
Loading...
