Installation
English32
Installation
STEP 2 Flooring
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the oor, put a large piece
of cardboard on each leg of the
refrigerator when you move it for
installation.
• Once the refrigerator is in its nal
position, do not move it unless
necessary to protect the oor. If you
have to, use thick paper or cloth such as
an old carpet along the movement path.
NOTE
If the refrigerator cannot pass through the entrance due to its size, see the Door removal
for entrance section.
Untitled-3 32 2023-01-30 11:31:59
To Next Page
Loading...
