Installation
English34
Installation
2. Disconnect the wire connector on the
fridge door.
- The position of the connectors differs
with the model.
3. Disconnect the water tube from the
coupler on the fridge door.
- This step only applies to the models
that require a water supply (for
features such as AutoFill Pitcher,
water dispenser, and ice maker).
4. Gently lift the clamp.
NOTE
To prevent damage to the clamp or injuries,
do not lift the clamp forcefully.
5. Pull the clamp to remove.
Untitled-3 34 2023-01-30 11:31:59
To Next Page
Loading...
Need help?
General
