English 35
Installation
6. Open the door by 90 degrees. While
holding the door, remove the hinge.
Be careful not to damage the wire
connectors when you remove the hinge.
CAUTION
If you remove the hinge without holding
the door, the door may fall and cause
injury.
7. Repeat steps 2-6 for the other door,
except for step 3.
- There is no water tube on the freezer
door.
Reattach the doors
CAUTION
• When you reattach the doors, make sure that you properly connect all the wire
connectors.
• The freezer door must be reattached before the fridge door.
1. Hold the freezer door and hook to the
hinge at the bottom of the refrigerator.
2. Put the hinge into its position, and then
insert it into the hole on the door.
Untitled-3 35 2023-01-30 11:31:59
To Next Page
Loading...
