Relay O/L
Part name
How To Do
Descriptive Picture
Water Valve
1. Disengage the housing connector.
2.Remove Cover Relay.
3. Remove the relay O/L with a flat-blade
screwdriver. (Refer to the picture)
1. Unscrew the water valve fixed by the
screw.
2.
Disassemble the white part.
Pull out the black pin.
3. Remove 2 water hose parts while
pushing the upper part of.
(Refer to the picture)
4. Disengage 2 housing connector parts.
5. Remove the hose connected by the
nut with a wrench(8mm).
35
3. DISASSEMBLY AND REASSEMBLY
To Next Page
Loading...
