42
4. TROUBLESHOOTING
1) In the normal operation, press Lighting and Energy Saver(Vacation) buttons simultaneously for
6 seconds, then the display panel will blink for 2 seconds.
2) Press Fridge Temp. button @ to get into this check mode with an audible tone.
3)
Each illuminating LED segment stands for the component which has an ouput signal from the control board.
4) This mode will terminate automatically after 30 seconds
4-7) Load Operation Check Function
Press both button for 8 seconds at the same time
@
NO ITEM DESCRIPTION DISPLAY DIGITAL NO.
1
FRIDGE FAN HIGH R-FAN HIGH RPM Fridge second digit a
2
FRIDGE FAN LOW R-FAN LOW RPM Fridge second digit b
3
FRIDGE DEFROST HEATER R-DEF HEATER ON Fridge second digit c
4
START MODE
Operating Step Display
(no perticular meaning)
Fridge second digit d
5
OVER-LOAD MODE Over 34℃ Ambient Temp Fridge second digit e
6
LOW-TEMP MODE Less than 21℃ Ambient Temp Fridge second digit f
7
EXHIBIT MODE Exhibition Mode On Fridge second digit g
8
ICE FULL Bucket Ice Full Fridge second digit d
9
COMPRESSOR COMP On Freezer second digit a
10
FREEZER FAN HIGH F-FAN HIGH RPM Freezer second digit b
11
FREEZER FAN LOW F-FAN LOW RPM Freezer second digit c
12
FREEZER DEFROST HEATER
F-DEF HEATER ON Freezer second digit d
13
CONDENSER FAN HIGH C-FAN HIGH RPM Freezer second digit e
14
CONDENSER FAN LOW C-FAN LOW RPM Freezer second digit f
15
DISPENSER HEATER Dispenser Heater On Freezer second digit g
16
C-ROOM BOX-FAN C-ROOM BOX-FAN ON Fridge first digit c
17
NORMAL CONDITIONS ⑤ & ⑥ All Off(22~33℃)
Fridge second digit e,f LED all Off
- Load Mode Check List
To Next Page
Loading...
