Samsung RT30 - Replacing the Lamp; Basic Preparation

6
REPLACING THE LAMP
s
11
11
Press upper tab of the lamp cover
with some tool such as screwdriver and
pull it out.
22
22
- Turn the existing lamp bulb and replace it with a new one.
- Replace the lamp cover by aligning the cover at the top and carefully
pressing it into place.
BASIC PREPARATION
Before using
11
11
Wipe the appliance inside and outside
using a cloth dampened with warm
water and a small amount of
detergent.
22
22
Before plugging in for the first time,
allow the refrigerator to stabilize for at
least one hour.
Allow the freezer compartment to cool
for 2 to 3 hours before storing food.
DA68-01184A-EN 30/11/05 5:33 PM Page 6