English 29
Installation
4. Insert the upper area of the adapter
cover rst, and then close to lock as
shown.
NOTE
The marked area is the cover of the
optional adapter, not a crack or defect.
STEP 3 Flooring
• The surface to install the refrigerator
must support a fully loaded refrigerator,
or approximately 100 kg.
• To protect the oor, put a large piece
of cardboard on each leg of the
refrigerator.
• Once the refrigerator is in its nal
position, do not move it unless
necessary to protect the oor. If you
have to, use a thick paper or cloth such
as old carpets along the movement
path.
Untitled-23 29 2019-07-10 7:59:54
To Next Page
Loading...
