36
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.3.8 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language and change the resolution to the optimum value.
1
Select a language by moving the JOG button UP/DOWN. Next, press the JOG button.
2 To hide the information message, press the JOG button.
If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
The optimum resolution can also be selected in Control Panel on your PC.
**** x **** **Hz
English
Language
Enter
The optimal resolution for this
monitor is as follows:
Use the above settings to set
the resolution on your PC.
To Next Page
Loading...
