70
Setup and Reset
6
6 Setup and Reset
6.8 Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
6.8.1 Configuring Power LED On
1 When the Function Key Guide appears, select [] by moving the JOG button UP.
Next, press the JOG button.
2 Move to SETUP&RESET controlling the JOG button UP/DOWN and press the JOG button.
3 Move to Power LED On controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Working: The power LED is on when the product is turned on.
Stand-by: The power LED is on when the product is turned off.
4 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5 The selected option will be applied.
To Next Page
Loading...
