Samsung S23A700D - Depth

29
3D
2
2 3D
Configuring the 3D
1 Press any button on the front of the product to display the OSD guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to Picture and press [ ] on the product.
3 Press [ ] to move to 3D and press [ ] on the product.
4 Press [ ] to move to 3D Mode and press [ ] on the product. The following screen will
appear.
 Off: Disable the 3D Mode function.
 2D 3D: Convert 2D video to 3D video.
 Frame Sequential : Display the left and right images alternately in each frame.
 Top Bottom : Display the top and bottom images overlapping each other to allow you to
experience the 3D effect.
 Side-By-Side : Display the left and right images overlapping each other to allow you to
experience the 3D effect.
5 Press [ ] to move to the option you want and press the [ ].
6 The selected option will be applied.
2.1.2 Depth
Determines the three-dimensional effect of the 3D video.
This option is available only when the 3D mode is set to 2D 3D.
Configuring Depth
1 Press any button on the front of the product to display the OSD guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to Picture and press [ ] on the product.
3 Press [ ] to move to 3D and press [ ] on the product.
MENU
Off
2D → 3D
Frame Sequential
Top-Bottom
Side-by-Side
:
3D Mode
Depth
L/R Change
3D -> 2D
3D
→
→
MENU