44
Screen Setup
4
4 Screen Setup
Lean Back Mode 1 : Select this option to view from a place slightly lower than the product.
Lean Back Mode 2 : Select this option to view from a place lower than Lean Back Mode 1
mode.
Standing Mode : Select this option to view from a place higher than the product.
Side Mode : Select this option to view from either side of the product.
Group View: Select this option for more than one viewer to view from places , , and .
Custom: Lean Back Mode 1 will be applied by default if Custom is selected.
5 Press [ ] to move to the option you want and press the [ ].
6 The selected option will be applied.
4.1.2 SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
This option is not available if 3D Mode is enabled.
This menu is not available when Angle is enabled.
Not available if Eco Saving is set to On.
Sub-options under Bright may vary depending on the settings of "PC/AV Mode."
("7.4 PC/AV Mode")
This menu is not available when Color is in Full or Intelligent mode.
Configuring Bright
1 Press any button on the front of the product to display the OSD guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to Picture and press [ ] on the product.
3 Press [ ] to move to MAGIC and press [ ] on the product.
4 Press [ ] to move to Bright and press [ ] on the product. The following screen will
appear.
In PC mode
Custom: Customize the contrast and brightness as required.
To Next Page
Loading...
