48
Screen Setup
4
4 Screen Setup
4.4 Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
This option is not available if 3D Mode is enabled.
This menu is not available when Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Color is in Full or Intelligent mode.
4.4.1 Configuring Sharpness
1 Press any button on the front of the product to display the OSD guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to Picture and press [ ] on the product.
3 Press [ ] to move to Sharpness and press [ ] on the product. The following screen will
appear.
4 Adjust the Sharpness using the [ ] button.
4.5 Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
This option is not available if 3D Mode is enabled.
It is best to set Response Time to Normal or Faster when you are not viewing a movie.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
MENU
To Next Page
Loading...
