52
Configuring Tint
5
5 Configuring Tint
3 Press [ ] to move to Green and press [ ] on the product. The following screen will appear.
4 Adjust the Green using the [ ] button.
5.3 Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
This option is not available when Color is in Full or Intelligent mode.
5.3.1 Configuring Blue
1 Press any button on the front of the product to display the OSD guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Blue and press [ ] on the product. The following screen will appear.
4 Adjust the Blue using the [ ] button.
To Next Page
Loading...
