10
Removing the Stand
―
Before removing the stand from the product, place the product on a flat and stable surface with the screen
facing down.
Put the monitor down as shown
in the figure.
Turn the decoration cover in against the clock
and remove.
Relaxation fasten the connecting
screw at the bottom of the stand base.
Precautions for moving the product
• Hold the lower corners or edges of the
product when moving it.
• Do not directly apply pressure on the screen.
• Do not hold the screen when moving the
product.
• Do not hold the product upside down only
by the stand.
• Do not press down on the product. There is
a risk of damaging the product.
Stand upward to remove it in the direction
of the arrow.
Hold the release bottom and the stand pull down in the direction of the arrow.
1 2
5
4
3
To Next Page
Loading...
