21
Connection Using the USB Type-C Cable (S24A60*U /
S27A60*U / S32A60*U model only.)
―
Check the bandwidth of your USB Type-C cable whether it is available. The output may not be adequate
depending on the cable specification and condition.
―
Do not quickly connect or disconnect the connector and power cable, because it requires some time.
―
Due to the compatibility issue, the function may not be available when any Thunderbolt device is
connected using a cable.
―
When charging with a USB Type-C cable, malfunction may occur depending on the device type. In this case,
use the provided charger or consult the manufacturer of the device.
Power Boost (S24A60*U model only.)
It increases the charging speed for USB Type-C with mode-variable power consumption.
Power Boost Mode Charger Output for
USB Type-C
Backlight Value Use of USB Port
High 80 W 30 OFF
Low 70 W 30 ON
Off 65 W User-specified value in
case of 30 or more
ON
• 90 W is charged for USB Type-C in DPMS mode.
Connecting an External Monitor (S24A60*U /
S27A60*U / S32A60*U model only.)
Connection Using an DP Cable
To Next Page
Loading...
