24
Connection Using the DP Cable
―
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
DP IN
1
Connect the DP cable to the DP IN port on the back of the product and the DP port on the PC.
2
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC.
3
Change the input source to DisplayPort controlling the JOG button UP/DOWN, when input
source is not set.
―
Provided ports may vary depending on the product.
―
To display 3440 x 1440 @ 60 Hz, use a DP cable that supports 3440 x 1440 @ 60 Hz. Make sure that the
graphics card of the DP source supports 3440 x 1440 @ 60 Hz.
Connecting to Headphones or Speakers
―
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
AUDIO OUT
1
Connect an audio output device such as headphones or speakers to AUDIO OUT on the product.
―
The sound could only be heard when using the HDMI to HDMI cable or DP cable.
To Next Page
Loading...
