USB Super Charging
USB1
USB2
O
On
Set the USB Port1
charging On/O.
-
The displayed image may differ depending on the model.
―
Setting USB Super Charging to On during a data transfer will stop the data transfer. If you set USB Super Charging to Off,
the standard charging and data transfer feature will be available.
―
High-speed charging is possible using the
and ports only. These ports charge devices faster than typical USB
ports. The speed depends on the connected devices.
Conguring USB Super Charging
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to Settings controlling the JOG button UP/DOWN and press the JOG button.
3
Move to USB Super Charging controlling the JOG button UP/DOWN and press the JOG button.
•
Off: Disable USB Super Charging.
•
On: Enable the function to quickly charge a source device connected to the USB 3.0 port.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
―
Supported output by USB charging mode
―
Standard USB charging: 5 V, up to 900 mA (including USB 3.0)
―
Fast USB charging: 5 V, up to 1.5 A
(Outputs may differ depending on the device specifications.)
To Next Page
Loading...
