Adjusting Your Monitor
15
Parallelogram
Adjust the parallelogram setting when the display is leaning
left or right.
1 With the menu off, push the menu ( ) button.
2 Push the - button or + button until the
Geometry screen is displayed.
3 Push the menu ( ) button again and then press the
- or + button until the Parallelogram screen appears.
Push the menu ( ) button to open the Parallelogram
adjustment screen.
4 Use the - button or + button to adjust the Parallelogram setting.
Trapezoid
Adjust the trapezoid setting when the top or bottom of the
display is too large or small.
1 With the menu off, push the menu ( ) button.
2 Push the - button or + button until the
Geometry screen is displayed.
3 Push the menu ( ) button again and then press the
- or + button until the Trapezoid screen appears.
Push the menu ( ) button to open the Trapezoid
adjustment screen.
4 Use the - button or + button to adjust the trapezoid setting.
14
Adjusting Your Monitor
V-Size
Pincushion
Adjust the pincushion setting when the sides of the
display are bowed in or bowed out.
Follow these instructions to change the Size of
the monitor’s entire display.
1 With the menu off, push the menu ( ) button.
2 Push the - button or + button until the
V-Size screen is displayed.
3 Push the menu ( ) button to open the
V-Size adjustment screen.
4 Use the - and + buttons to change the vertical size
of the monitor’s viewing area.
1 With the menu off, push the menu ( ) button.
2 Push the - button or + button until the
Pincushion screen is displayed.
3 Push the menu ( ) button to open the
Pincushion adjustment screen.
4 Use the - button or + button to adjust the
pincushion setting.
To Next Page
Loading...
