30
Troubleshooting
User’s Manual
Question Answer
How can I change the
frequency?
How can I adjust the resolution?
How can I set the Power
Saving function?
The monitor makes a sound when it
is turned on.
Frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version of the
driver used.
(Refer to the computer or the video card manual fordetails.)
Windows ME/XP/2000: Set the resolution at the Control Panel,
Display, Settings.
* Contact the video card manufacturer for details.
Windows ME/XP/2000: Set the function at BIOS-SETUP of the computer or the
screen saver. (Refer to Windows/Computer Manual)
This is normal as some sound may be generated when the metal case and
the electromagnet, which are installed to block any electromagnetic waves,
interact with each other.
How can I clean the outer
case/Picture tube?
Disconnect the power cord and then clean the monitor with a soft cloth,
using either a plain water.
Do not leave any remains of the detergent nor scratch the case. Do not
allow any water to go inside the monitor.
Q & A
To Next Page
Loading...
