COLOR CCD CAMERA User Guide
38
Operating Your Camera
• A detection (FIXED/MOVED) error may occur if :
· multiple motions occur continuously in random directions
· a fixed object moves in one position continuously
· a second object screens the fi rst moving object
Notes
ú DETECT BOX : Outlines an object on the screen in a box when its movement matches
a custom Motion Type.
ú
ALARM OUT : Releases a signal from the MD Output Port on the back of the camera when
an object’s movement matches a custom Motion Type.
Â
FIXED/MOVED : Detects an object that emerges or disappears from the screen, or
stays onscreen without movement
.
- Time to FIXED / MOVED detection : 10 ~ 15 seconds
• If this area is not defined, neither Detection nor Tracking will take place.
Notes
ú
DETECT AREA : Motion Detection and tracking will
only occur within this defined area.
(Full Screen is defined as factory
default).
ú
MASK AREA : Specify a detection exception area to mask.
Select a mask area number and specify the
size and position.
Ķ
AREA : You can select up to 4 areas.
Ķ
MODE :
Determines whether to use the area selected
in the AREA.
To Next Page
Loading...
