Operating Your Camera
28_ Operating Your Camera
• CAM TITLE : If you enter a title, the title will
appear on the monitor.
1) If the SPECIAL menu screen is displayed, use
the Function Setup switch so that the arrow
indicates <CAM TITLE>.
2) Set it to <ON> by using the Function Setup
switch.
3) Press the Function Setup switch.
4) Use the Function Setup switch to move to a
desired letter and select the letter by pressing the Function Setup switch. Repeat this
to enter multiple letters. You can enter up to 15 letters.
5) Enter a title, move the cursor to <POS>
and press the Function Setup switch. The
entered title appears on the screen. Select
the position to display the title on the screen
by using the Function Setup switch and press
the Function Setup switch. When the position
is determined, select <END> and press
the Function Setup switch to return to the
SPECIAL menu.
J
When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you
enter one.
Only English is available in this mode.
If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted.
To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch.
Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then
press the Function Setup switch.
ABCD
←→↑↓
to Locate, then SET
CAM TITLE SETUP
To Next Page
Loading...
