l
COLOR
: The picture is always displayed in color.
B/W
: The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
IR LED Mode : On: 12EA, Off: 6EA
IR Mode : When IR LED is turned on
in B/W, the objects can be
clearly identifi ed due to the
function that decreases screen
saturation of objects within a
short distance.
AUTO
: The mode is switched to ’Color’
in a normal environment, but
switches to ’B/W‘ mode when
ambient illumination is low.
To set up the switching time for
AUTO mode, press the Function
Setup switch.
BURST MODE : You can turn on or
off the burst signal on B/W mode.
DWELL TIME : You can select the duration time about changing the day/
night mode.
→
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
DURATION : You can select the brightness level at which the camera
switches from day to night mode.
Color → B/W B/W → Color
Fast 2.5 lux 5 lux
Slow 1 lux 10 lux
※ Light levels are often site dependant.
When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as selecting 'COLOR' mode
and 'AUTO' mode cannot be selected.
The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable
camera operation.
BLC function does not work in B/W mode.
y
y
-
-
y
-
-
-
AUTO SETUP
▶ 1.BURST MODE ON
2.COLOR→B/W
DURATION FAST
DWELL TIME 3 SEC
3.B/W→COLOR
DURATION FAST
DWELL TIME 10 SEC
4.RETURN
IR MODE SETUP
TOP
IIIII
Â
IIIIIIIIIIIIIIII
50
BOTTOM
IIIIIIIIIIIIIIIIII
Â
III
110
LEFT
IIIIII
Â
IIIIIIIIIIIIIII
52
RIGHT
IIIIIIIIIIIIIIII
Â
IIIII
118
To Next Page
Loading...
