Samsung SCD 5000 - Adjusting the LCD

Preparation
ENGLISH
3232
✤ Your camcorder is equipped with a 2 inch color Liquid Crystal Display(LCD) screen, which enables you to
view what you are recording and play back directly.
✤ Depending on the conditions under which you are using the camcorder (indoors or outdoors), you can
adjust ;
■
BRIGHT ADJUST
■
COLOR ADJUST
1. Set the POWER switch to REC mode.
■
In PLAYER mode, you can only setup the LCD while the tape is playing.
2. Open the LCD screen. The LCD switches on.
3. Press the MENU button.
4. Turn the MENU DIAL so that VIEWER is highlighted and then
press the MENU DIAL.
5. Turn the MENU DIAL so that LCD ADJUST is highlighted.
6. Press the ENTER button to enter the sub-menu.
7. Turn the MENU DIAL so that it highlights the menu item you want to
adjust (BRIGHT ADJUST, COLOR ADJUST).
CAMCORDER REC MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAMCORDER REC MODE
INITIAL
LCD ADJUST
DATE/TIME
TV DISPLAY
CAMCORDER
CAMERA
MEMORY
VIEWER
CAMCORDER REC MODE
LCD ADJUST
VIEWER SET
BRIGHT ADJUST . . . . . . [ 1 8 ]
COLOR ADJUST . . . . . . [ 1 8 ]
Adjusting the LCD
FADE
S.SHOW
BLC
REV FWD
DELETE
T
A
P
E
M
E
M
O
R
Y
P
L
A
Y
REC
O
F
F
00655B SCD5000 (001~033) 6/11/03 2:18 PM Page 32