ENGLISH
7171
Using the CAMCORDER - Advanced Recording
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing Sound
1. Set the device to CAMCORDER.
■
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the camcorder.
2. Set the power switch to PLAY mode.
■
If you want to use an external microphone, connect the microphone to the
external MIC input jack on the camcorder.
3. Press the (PLAY/STILL) button and find the time frame of the scene to
be dubbed.
4. Press the (PLAY/STILL) button to pause the scene.
5. Press the A.DUB button on the Remote Control.
■
A.DUB will be displayed on the LCD.
■
The camcorder is in a ready-to-dub state for dubbing.
6. Press the (PLAY/STILL) button to start dubbing.
■
Press the (STOP) button to stop the dubbing.
Audio Dubbing
PHOTO
REW/RPS
A.DUB STOP SELF TIMER
SLOW
PLAY FF/FPS
STILL ZERO MEM.
FADE
S.SHOW
BLC
REV FWD
T
A
P
E
M
E
M
O
R
Y
P
L
A
Y
R
E
C
O
F
F
00655B SCD5000 (070~109) 6/11/03 2:20 PM Page 71
To Next Page
Loading...
