29
ENGLISH
Adjusting the LCD
✤ Your camcorder is equipped with a 2.5 inch color Liquid Crystal Display(LCD) screen, which enables you to view what you are recording or playing
back directly.
✤ Depending on the conditions in which you are using the camcorder (indoors or outdoors for example), you can adjust ;
■
Brightness
■
Color
1. Set the POWER switch to CAMERA or PLAYER position.
2. Open the LCD monitor, the LCD switches on.
3. Press the MENU ON/OFF button.
4. Turn the MENU DIAL so that LCD ADJUST is highlighted.
5. Press ENTER to enter the sub-menu.
6. Turn MENU DIAL so that it highlights the menu item you want to adjust (BRIGHT, COLOR).
7. Press ENTER again.
■
You can adjust the LCD using MENU DIAL.
8. Press ENTER.
■
For further adjustment, repeat steps 6, 7, 8.
9. Press the MENU ON/OFF button to finish the setting.
Use the focus adjustment knob of the VIEWFINDER to focus the picture. (refer to figure)
Using the VIEWFINDER
Basic Recording
Adjusting the Focus
(MENU) SP STBY
LCD ADJUST
CUSTOM SET
DIS............................OFF
PIP............................OFF
D.ZOOM...................OFF
PROGRAM AE .........AUTO
: MENU
●
LCD ADJUST
●
SP STBY
BRIGHT I–00 18 35–I
COLOR
RETURN
SEL.:ENTER
: MENU
To Next Page
Loading...
