Samsung SCD80 - Turning the OSD On;Off (on Screen Display)

ENGLISH
Getting to Know Your Camcorder
1919
Turning the OSD on/off (On Screen Display)
●
Turning OSD on/off
Press the DISPLAY button on the left side panel.
- Each press of the button toggles the OSD function on and off.
- When you turn the OSD off,
In CAMERA mode: The STBY, REC, EASY.Q and CUSTOM.Q modes are always displayed on the OSD, even when the
OSD is turned OFF and the key input is displayed for 3 seconds then turned off.
In PLAYER mode: When you press any Function button, the function is displayed on the OSD for 3 seconds before
it turns off.
●
Turning the DATE/TIME on/off
- The DATE/TIME is not affected when the OSD function is switched ON or OFF.
- To turn the DATE/TIME on or off, access the menu and change the DATE/TIME mode. (see page 52)
- You may also use the Quick Menu to turn the DATE/TIME ON or OFF. (see page 54)
(only in CAMERA mode)
00511B SCD80-SEA (01~27) 2/12/03 11:42 AM Page 19