Samsung SCD80 - System Requirements; Recording with a DV Connection Cable

ENGLISH
7474
IEEE 1394 Data Transfer
● System requirements
■
CPU : faster Intel
®
Pentium III™ 450Mhz compatible.
■
Operating system : Windows
®
98SE, ME, XP, Mac OS
■
Main memory : more than 64 MB RAM
■
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
■
Make sure that DV IN appears on the screen.
3. Press the START/STOP button to begin REC PAUSE mode.
■
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
■
If you want to pause recording momentarily, press the START/STOP button again.
6. To stop recording, press the (STOP) button.
Notes
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
00511B SCD80-SEA (59~82) 2/12/03 11:57 AM Page 74