ENGLISH
Advanced Recording
3737
●
CLOCK SET
✤ CLOCK setup works in CAMERA and PLAYER modes.
✤ The DATE/TIME is automatically recorded onto a tape.
Before recording, please set the DATE/TIME.
1. Press the MENU button.
■
The menu list will appear.
2. Turn the MENU DIAL to highlight INITIAL and press the ENTER button.
3. Use the MENU DIAL to select CLOCK SET from the submenu.
4. Press the ENTER button to enter SETTING mode.
■
A blinking item indicates the item to be changed.The year will blink first.
5. Using the MENU DIAL, change the year setting.
6. Press the ENTER button.
■
The month will blink.
7. Using the MENU DIAL, change the month setting.
8. Press the ENTER button.
■
The day will blink.
9. You can set the day, hour and minute following the same procedure for setting the year and
month.
10.Press the ENTER button after setting the minutes.
■
The word COMPLETE! will appear, and a few seconds later, the menu screen will
automatically return to the sub menu.
11.To exit, press the MENU button.
CAM MODE
INITIAL CLOCK SET
REMOCON
DEMO
CAMERA
A/V
VIEWER
CAM MODE
INITIAL SET
CLOCK SET
REMOCON
DEMONSTRATION
CAM MODE
INITIAL SET
CLOCK SET
1 0 : 0 0 AM
MAY. 10, 2002
00511B SCD80-SEA (28~58) 2/12/03 11:55 AM Page 37
To Next Page
Loading...
