Samsung SCL 610 - DIS (Digital Image Stabilizer, SCL630;L650 Only)

ENGLISH
39
Advanced Recording
DIS (Digital Image Stabilizer, SCL630/L650 only)
✤ The DIS function works in CAMERA mode only.
✤ DIS (Digital Image Stabilizer) is a handshake compensation function that compensates for any shaking
or moving of the hand holding the camcorder (within reasonable limits).
✤ It provides more stable pictures when:
■ Recording in the Zoom In mode
■ Recording a small object close-up
■ Recording and walking at the same time
■ Recording through the window of a vehicle
1.
Set the power switch to CAMERA mode. (See page 22)
■ Open the LCD monitor and adjust it to see comfortably.
2. Press the MENU ON/OFF button.
■ The MENU list will appear.
3. Turn the UP/DOWN dial to DIS.
4. Press ENTER.
■ The DIS setting will change.
5. Press the MENU ON/OFF button to end the setting.
■ When the DIS is set, the DIS mark
()
will displayed
on the OSD.
Notes:
1. It is recommended you deactivate the handshake compensation function when using a tripod.
2. The DIS function will not operate in the DSE mode.
3. The MENU ON/OFF function will not operate in EASY or CUSTOM mode.
➔
➔
LCD ADJUST
CUSTOM SET
CLOCK SET
TITLE SET
TITLE....................OFF
DIS........................OFF
.
.
DEMO ..................OFF
LCD ADJUST
CUSTOM SET
CLOCK SET
TITLE SET
TITLE....................OFF
DIS........................OFF
.
.
DEMO ..................OFF
LCD ADJUST
CUSTOM SET
CLOCK SET
TITLE SET
TITLE....................OFF
DIS........................ON
.
.
DEMO ..................OFF