ENGLISH
43
Advanced Recording
Setting the PROGRAM AE(Automatic Exposure) mode
1. Set the power switch to CAMERA mode.
2. Press the P.AE button, the ( ) symbol will be displayed.
3. Press the P.AE button until the appropriate symbol is displayed.
( ➔➔➔➔ )
■ No Display : Full Auto mode.
Notes:
■ The screen status that is changed by the P.AE button will be recorded on the tape.
■ To end the P.AE function, press the P.AE button once or several times,
until the P.AE Icon is no longer displayed.
■ The P.AE function will not operate in EASY or CUSTOM mode.
■ The BLC function will not operate in P.AE mode.
STBY
0:00:00
CUSTOM
JAN.31.2001
To Next Page
Loading...
