To Next PageTo Next PageWhy is my Samsung SCL700 display blinking?
If your Samsung Camcorder displays 'Blinking Display', it means the battery pack is either almost or fully discharged. To resolve this, simply replace the current battery with a charged one.
What to do if my Samsung SCL700 says 'TAPE END! no'?
If your Samsung Camcorder shows 'TAPE END! no', it indicates that the tape has reached its end. You should replace it with a new tape to continue recording.
What does 'TAPE END! slow' mean on my Samsung SCL700 Camcorder?
If your Samsung Camcorder displays 'TAPE END! slow', it means the tape is almost at its end. You should prepare a new tape to avoid interruptions.
Why does my Samsung SCL700 Camcorder say 'TAPE! slow'?
If your Samsung Camcorder displays 'TAPE! slow', it means there is no tape inserted in the camcorder. Insert a tape to resolve this issue.
What to do if Samsung Camcorder displays 'D.EMG C.EMG R.EMG L.EMG slow'?
If your Samsung Camcorder displays 'D.EMG C.EMG R.EMG L.EMG slow', this indicates a mechanical fault. Here's what you can try: 1. Eject the tape. 2. Set the camcorder to OFF. 3. Detach the battery. 4. Reattach the battery.
Why is my Samsung SCL700 Camcorder display so slow?
If the display on your Samsung Camcorder is running slowly, it's likely that the battery pack is almost discharged. Replace the discharged battery with a fully charged one to resolve this issue.
What does TAPE END! mean on my Samsung SCL700 Camcorder?
When your Samsung Camcorder shows 'TAPE END!,' it means the tape has reached its end. You should change to a new one.
Why does my Samsung SCL700 Camcorder say TAPE!?
If your Samsung Camcorder displays 'TAPE!,' it indicates that there is no tape currently inserted in the camcorder. To fix this, simply insert a tape.
What does PROTECTION! mean on my Samsung Camcorder?
If your Samsung Camcorder shows 'PROTECTION!', it means the tape is protected from recording. If you want to record, release the protection.
What to do if my Samsung SCL700 Camcorder displays D.EMG C.EMG R.EMG L.EMG?
If your Samsung Camcorder displays 'D.EMG C.EMG R.EMG L.EMG', this indicates a mechanical fault. Try the following steps: 1. Eject the tape. 2. Set the camcorder to OFF. 3. Detach the battery. 4. Reattach the battery.
General
