3-6 Pole Base S, T
Samsung Electronics3-6
Disassembly and Reassembly
Fig. 3-6 Pole Base S, T
3 SUB DECK ASS'Y
1 POLE BASE S ASS'Y
2 POLE BASE T ASS'Y
4 LINK LOADING T
A
B
D
C
E
5 LINK LOADING S
3-6-1 Disassembly
1. Move the Pole-Base S Ass’y 1 toward arrow
“A”, then remove it from Link Loading S 5
(arrow “B”).
2. Push the Pole Base T Ass’y 2 (arrow “D”).
then remove it from Link Loading T 4 .
3-6-2 Reassembly
1. Insert the Pole Base S Ass’y 1 into Link Loading
S 5 : Turn it (reverse of arrow “B”) and put it on
the Sub Deck Ass’y 3 ; then push it (reverse of
arrow “A”).
2. Insert the Pole-Base T Ass’y 2 into the Link
Loading T 4 : Turn it (reverse of arrow “E”) and
put it on the Sub Deck Ass’y 3 ; then push the
Pole-Base T Ass’y 2 (reverse of arrow “D”).
Note 1 : When assembling or disassembling, do
not deform the Link Loading T 4 , S 5 .
Note 2 : Do not stain the roller or post.
To Next Page
Loading...
