8_ setting up auto track
setting up auto track
Two different Auto Track setup methods are available.
Using Presets
Select a starting point for Auto Track as a preset to activate Auto Tracking. (This can be used in
conjunction with Group SEQ and Tour SEQ.)
Using Target Lock
Select an object on the screen to activate Auto Tracking.
The PIP feature will be disabled if using Auto Track.
AUTO TRACK USING PRESETS
y
-
y
-
M
Preset
Settings
Editing
Presets
Auto
Tracking
· Set a Preset to Start
Auto Tracking
· Set Zoom/Focus
· Tracking On
· Set Auto Tracking
details
· Select Tracking Mode
for a Preset
<Auto Track Setting Flow Chart>
Selecting Auto Track Starting Point 1
Using the joystick, select a preset number from 1 to 255,
and then press [Enter].
1.
z
Preset Setting
Preset = 001 (255)
001 :
þþþþþþþþþþþþþþþþþþþþ
021 :
þþþþþþþþþþþþþþþþþþþþ
Preset Setting
1+PST:ZOOM 2+PST:FOCUS
To Next Page
Loading...
