Samsung SCP-2370 - Page 9

English - 9
● SETTING UP AUTO TRACK
Selecting Auto Track Starting Point 2
At Preset Edit, select the preset number under the Preset
Settings menu.
The selected preset is indicated with an asterisk (*).
At Menu [After Action], select [Auto Track].
Auto Track : Perform Auto Track upon arrival.
For a SCP-3370 series model, select [AutoTrack] from
[Intelligence], not from [After Action].
When the [After Action] menu is set to [Auto Track], the
letter “T” appears next to the preset number as shown in
the fi gure.
Setting Auto Tracking Details
Select [Main Menu – P/T Setting – Auto Track].
At Menu [Auto Track], select [ON] to activate Auto Tracking.
Set the Camera Height, Object Size, Sensitivity, and Zoom
Control options.
Refer to the operation timing chart in the next page and set as
necessary each of: [Auto Release], [Auto Return] and [Lost Mode].
2.
z
-
z
-
Ú
z
3.
z
z
z
z
Preset Edit [001]
PTZ XXX/XXX/XXX
Focus ONE SHOT
Brightness 050
Iris AUTO
Back Light OFF
Day/Night AUTO
After Action OFF
Scene Adj
Preset Edit
Preset = 001* (255)
001 : þþþþþþþþþþþþþþþþþþþþ
021 : þþþþþþþþþþþþþþþþþþþþ
Preset Edit
Preset = 001T (1~255)
001 : þþþþþþþþþþþþþþþþþþþþ
021 : þþþþþþþþþþþþþþþþþþþþ
Auto Tracking
Auto Track OFF
Camera Height 2.5M
Object Size SMALL
Sensitivity HIGH
Zoom Control OFF
Auto Release OFF
Auto Return OFF
Lost Mode STOP
Others