Samsung SCV-3120 - I;O Wiring Diagram

installation & connection
12_ installation & connection
I/O Wiring Diagram
If the camera operates normally, the following screen will be displayed for 5
seconds and then disappears.
The requirements for RS485 control is as follows :
- Signaling Speed: 9600 bps
- Data Bit : 8 bits
- Stop Bit : 1 bit
- Parity Bit : none
TYPE 4_12ZOM_WDR_P
PROTOCOL SAMSUNG-E
ADDRESS 0
COMM.TYPE RS485,HALF
BAUD RATE 9600
CAMERA VER. v1.00_000000
LENS OK
Z6809126301A-SCV-3120-PAL-ENG.in12 12 2010-4-30 17:37:19