OTHER SET
You can reset the system by running FACTORY DEFAULTS, or set the font color etc.
Select <MAIN MENU>-<OTHER SET>.
Select each item and set appropriately.
LANGUAGE
You can set the language of the user interface using
_+ buttons
.
FACTORY DEFAULTS
When selected, the <FACTORY DEFAULTS> screen
appears and you can reset all settings to the factory
default settings by selecting the <OK>. However, the
protocol, baud rate, address and the language settings
will not be reset.
Note that the resetting the system to the factory
default will erase all settings data.
OSD COLOR
Selects the color of the on-screen display font.
1.
2.
M
FACTORY DEFAULTS
OK
CANCEL
OTHER SET
LANGUAGE ENGLISH
FACTORY DEFAULTS
OSD COLOR BW
ALARM SET
ALARM SET
You may set Alarm in, Delay time and Alarm out
option in Alarm setup menu.
The Delay time arranges from 1 to 60 seconds. It is
set as 5 seconds in default.
If MOTION and FIXED/MOVED option are set as on,
camera would send off alarm beep after detecting the
moving object.
Whenever there is alarm signal, camera would send
off alarm beep if you set alarm as on.
ALARM SET
ALARM IN OFF
DELAY TIME 5 SEC
ALARM OUT
ALARM OUT
MOTION ON
FIXED/MOVED ON
ALARM ON
To Next Page
Loading...
