DIGITAL ZOOM
You can set the maximum allowable digital zoom ratio.
Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of x12. If
you set DIGITAL ZOOM to x16, you can take a shot at up to x192 (12x16).When you set
DISPLAY ZOOM as on, you may see zoom value on the screen.
DETAIL
Used to adjust the vertical and horizontal distinction, respectively.
V-SYNC
You can set the V-SYNC mode.
- If you select <INT>, the camera will use the internal synchronization.
- If selecting <LINE>, the camera will use an external power frequency for synchronization.
The LL-PHASE can be adjusted as appropriate.
It’s a must to use AC 24V power supply when you select line lock.
AGC COLOR SUP
You can adjust the color reproduction range
according to AGC.
REVERSE
You can reverse the video signal from left to right,
upside down, or vice versa to your convenience.
POSI/NEGA
You can set the video brightness signal to normal or reverse.
PIP
You can view a main image with a sub image on the same screen.
If more than one PRIVACY ZONE is specified, and PRIVACY SET to <ON>, the PIP function is not
available.
As long as SENS-UP is set to FIXED, PIP menu is not available.
According to the luminance, PIP will disappear if the SENS-UP menu is set to AUTO.
M
M
DAY/NIGHT AUTO
WHITE BAL
FOCUS MODE ONEAF
ZOOM SPEED [3]
DISPLAY ZOOM OFF
DIGITAL ZOOM X16
DETAIL [2]
V-SYNC (INT)---
AGC COLOR SUP MID
To Next Page
Loading...
