English _11
● INSTALLATION & CONNECTION
installation & connection
CONNECTING WITH OTHER DEVICE
Power Supply
Connect the power adaptor and camera’s power in jack.
Be careful not to reverse the polarity when you connect the power cable.
Connecting to the monitor
Connect the camera’s Video Out jack and the monitor’s video in jack.
Function jack
ALARM IN: Alarm in jack for motion detection.
ALARM OUT: Alarm out jack for motion detection (Open connector, On Gnd).
DAY/NIGHT IN:
This is a function to receive the external DAY/NIGHT signal from the
sensor(option) and convert the signal into BW.
GND
RS-485 DATA-: Jack for connection to RS-485 DATA- signal line.
RS-485 DATA+: Jack for connection to RS-485 DATA+ signal line.
J
To Next Page
Loading...
