Name: Samsung SCX-4216F Series
Brand: Samsung
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Troubleshooting

Samsung Electronics 4-23

4.8.5 Multi-Feeding

• Description Multiple sheets of paper are fed at once.

Check and Cause Solution

1. Solenoid malfunction(the solenoid does not work

properly): Perform DCU mode : solenoid check 06.

2. Pad-Friction is contaminated with foreign matter.(oil...)

3. The face of paper is blended.

1. Replace the solenoid if necessary.

2. Clean the pad friction with soft clothe dampened

with IPA(Isopropyl Alcohol).

3. Use the smooth paper.

4.8.6 Paper rolled in the fuser

• Description If contaminated at intervals of 57mm on the back of a paper.

Check and Cause Solution

1. Contamination of the pressure roller.

(Background, Hot off set)

1. Disassemble the fuser, clean the area between the

Heat-roller and Thermistor and remove the foreign

matter of the pressure roller.

2. If background appears badly in the printing, fix it by

referring to the solutions for background.

(See 4.5.8 Background)

Questions and Answers:

Need help?

Do you have a question about the Samsung SCX-4216F Series and is the answer not in the manual?

Samsung SCX-4216F Series Specifications

General