Name: Samsung SCX-4216F Series
Brand: Samsung
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Troubleshooting

4-24 Samsung Electronics

4.8.7 Paper rolled in the OPC

• Description Paper is rolled up in the OPC.

Check and Cause Solution

1. Paper is too much thin.

2. The face of paper is curled.

1. Recommend to use normal paper.

2. How to remove the rolled paper in the OPC.

• Remove the paper while turning the OPC against

the ongoing direction.

• Clean fingerprints on the OPC softly with soft

cloth dampened with IPA(Isopropyl Alcohol) or tis-

sue.

4.8.8 Defective ADF

• Description

ADF (Automatic document Feeder) is not properly operated.

Check and Cause Solution

1. Check if ADF rubber and HOLDER rubber are dam-

aged.

2. Check if the document sensors of OPE ASS'Y

(2 paper sensors) are normal.

1. Replace the contaminated or damaged part.

2. If you cannot confirm the damaged part with the

naked eye, try to replace the OPE ASS'Y.

Questions and Answers:

Need help?

Do you have a question about the Samsung SCX-4216F Series and is the answer not in the manual?

Samsung SCX-4216F Series Specifications

General