C
OPYING
4.5
4
2
Make sure that the bottom of the document stack matches
the paper size marked on the document tray.
3
Customise the copy settings including number of copies,
copy size, contrast and image type by using the control
panel buttons. See “Setting Copy Options” on page 4.6.
To clear the settings, use the Stop/Clear button.
4
If necessary, you can use special copy features, such as
Collation and 2 or 4 up-copying.
5
Press Start Copy or Start Copy/Fax to begin copying.
The display shows the copy processing.
NOTE:
Dust on the ADF glass may cause black lines on the
printout. Keep it always clean.
To Next Page
Loading...
