Samsung SCX-4216F - User Mode, Tech Mode, and Diagnostics

C OPYING
4.9
4
Auto Fit Copying
This special copy mode can be applied when you load document
only using the document glass. For SCX-4116/4216F, if a
document is detected in the ADF, the Auto Fit does not work.
1 Load the document to be copied on the document glass,
and close the cover.
2 Press Special.
3 Press Special or the scroll button ( ¦ or  ) until “Autofit”
appears on the bottom line.
4 Press Enter to save the selection.
5 If necessary, customise the copy settings including number
of copies, contrast and image type by using the control
panel buttons. See “Setting Copy Options” on page 4.6.
NOTE: You cannot adjust the copy size using the Reduce/
Enlarge button while the Auto Fit copying is enabled.
6 Press Start Copy or Start Copy/Fax to begin copying.
Clone Copying
This special copy mode can be applied when you load document
only using the document glass. For SCX-4116/4216F, if a
document is detected on the ADF, the Clone copying feature
does not work.
1 Load the document to be copied on the document glass,
and close the cover.
2 Press Special.
3 Press Special or the scroll button ( ¦ or  ) until “Clone”
displays on the bottom line.
4 Press Enter to save the selection.
A