Clearing paper jams
120
4. Troubleshooting
9
In the exit area
Click this link to open an animation about clearing a jam.
1
Open and close the front cover. The jammed paper is
automatically ejected from the machine.
If you do not see the jammed paper, go to the next step.
2
Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is any resistance
when you pull, stop and go to the next step.
3
Open the rear cover.
4
Remove the jammed paper as shown in the following figure.
5
Close the rear cover. Printing automatically resumes.
10
In the duplex unit area
Click this link to open an animation about clearing a jam.
1 fuser door
3
3
To Next Page
Loading...
